# Autogenerated configuration file template
#################################
# 8bit-dns	Allow 8bit dns queries
#
# 8bit-dns=no

#################################
# allow-axfr-ips	Allow zonetransfers only to these subnets
#
# allow-axfr-ips=127.0.0.0/8,::1

#################################
# allow-dnsupdate-from	A global setting to allow DNS updates from these IP ranges.
#
# allow-dnsupdate-from=127.0.0.0/8,::1

#################################
# allow-notify-from	Allow AXFR NOTIFY from these IP ranges. If empty, drop all incoming notifies.
#
# allow-notify-from=0.0.0.0/0,::/0

#################################
# allow-unsigned-notify	Allow unsigned notifications for TSIG secured domains
#
# allow-unsigned-notify=yes

#################################
# allow-unsigned-supermaster	Allow supermasters to create zones without TSIG signed NOTIFY
#
# allow-unsigned-supermaster=yes

#################################
# also-notify	When notifying a domain, also notify these nameservers
#
# also-notify=

#################################
# any-to-tcp	Answer ANY queries with tc=1, shunting to TCP
#
# any-to-tcp=yes

#################################
# api	Enable/disable the REST API (including HTTP listener)
#
# api=no

#################################
# api-key	Static pre-shared authentication key for access to the REST API
#
# api-key=

#################################
# api-logfile	Location of the server logfile (used by the REST API)
#
# api-logfile=/var/log/pdns.log

#################################
# api-readonly	Disallow data modification through the REST API when set
#
# api-readonly=no

#################################
# axfr-lower-serial	Also AXFR a zone from a master with a lower serial
#
# axfr-lower-serial=no

#################################
# cache-ttl	Seconds to store packets in the PacketCache
#
# cache-ttl=20

#################################
# carbon-interval	Number of seconds between carbon (graphite) updates
#
# carbon-interval=30

#################################
# carbon-ourname	If set, overrides our reported hostname for carbon stats
#
# carbon-ourname=

#################################
# carbon-server	If set, send metrics in carbon (graphite) format to this server IP address
#
# carbon-server=

#################################
# chroot	If set, chroot to this directory for more security
#
# chroot=

#################################
# config-dir	Location of configuration directory (pdns.conf)
#
# config-dir=/etc/pdns

#################################
# config-name	Name of this virtual configuration - will rename the binary image
#
# config-name=

#################################
# control-console	Debugging switch - don't use
#
# control-console=no

#################################
# daemon	Operate as a daemon
#
daemon=no

#################################
# default-ksk-algorithms	Default KSK algorithms
#
# default-ksk-algorithms=ecdsa256

#################################
# default-ksk-size	Default KSK size (0 means default)
#
# default-ksk-size=0

#################################
# default-soa-edit	Default SOA-EDIT value
#
# default-soa-edit=

#################################
# default-soa-edit-signed	Default SOA-EDIT value for signed zones
#
# default-soa-edit-signed=

#################################
# default-soa-mail	mail address to insert in the SOA record if none set in the backend
#
# default-soa-mail=

#################################
# default-soa-name	name to insert in the SOA record if none set in the backend
#
# default-soa-name=a.misconfigured.powerdns.server

#################################
# default-ttl	Seconds a result is valid if not set otherwise
#
# default-ttl=3600

#################################
# default-zsk-algorithms	Default ZSK algorithms
#
# default-zsk-algorithms=

#################################
# default-zsk-size	Default ZSK size (0 means default)
#
# default-zsk-size=0

#################################
# direct-dnskey	Fetch DNSKEY RRs from backend during DNSKEY synthesis
#
# direct-dnskey=no

#################################
# disable-axfr	Disable zonetransfers but do allow TCP queries
#
# disable-axfr=no

#################################
# disable-axfr-rectify	Disable the rectify step during an outgoing AXFR. Only required for regression testing.
#
# disable-axfr-rectify=no

#################################
# disable-syslog	Disable logging to syslog, useful when running inside a supervisor that logs stdout
#
# disable-syslog=no

#################################
# disable-tcp	Do not listen to TCP queries
#
# disable-tcp=no

#################################
# distributor-threads	Default number of Distributor (backend) threads to start
#
# distributor-threads=3

#################################
# dname-processing	If we should support DNAME records
#
# dname-processing=no

#################################
# dnssec-key-cache-ttl	Seconds to cache DNSSEC keys from the database
#
# dnssec-key-cache-ttl=30

#################################
# dnsupdate	Enable/Disable DNS update (RFC2136) support. Default is no.
#
# dnsupdate=no

#################################
# do-ipv6-additional-processing	Do AAAA additional processing
#
# do-ipv6-additional-processing=yes

#################################
# domain-metadata-cache-ttl	Seconds to cache domain metadata from the database
#
# domain-metadata-cache-ttl=60

#################################
# edns-subnet-processing	If we should act on EDNS Subnet options
#
# edns-subnet-processing=no

#################################
# entropy-source	If set, read entropy from this file
#
# entropy-source=/dev/urandom

#################################
# expand-alias	Expand ALIAS records
#
# expand-alias=no

#################################
# forward-dnsupdate	A global setting to allow DNS update packages that are for a Slave domain, to be forwarded to the master.
#
# forward-dnsupdate=yes

#################################
# forward-notify	IP addresses to forward received notifications to regardless of master or slave settings
#
# forward-notify=

#################################
# guardian	Run within a guardian process
#
guardian=no

#################################
# include-dir	Include *.conf files from this directory
#
# include-dir=

#################################
# launch	Which backends to launch and order to query them in
#
# launch=

launch=gmysql
gmysql-host=127.0.0.1
gmysql-port=3307
gmysql-user=cyberpanel
gmysql-password=1qaz@9xvps
gmysql-dbname=cyberpanel

#################################
# load-modules	Load this module - supply absolute or relative path
#
# load-modules=

#################################
# local-address	Local IP addresses to which we bind
#
# local-address=0.0.0.0

#################################
# local-address-nonexist-fail	Fail to start if one or more of the local-address's do not exist on this server
#
# local-address-nonexist-fail=yes

#################################
# local-ipv6	Local IP address to which we bind
#
# local-ipv6=::

#################################
# local-ipv6-nonexist-fail	Fail to start if one or more of the local-ipv6 addresses do not exist on this server
#
# local-ipv6-nonexist-fail=yes

#################################
# local-port	The port on which we listen
#
# local-port=53

#################################
# log-dns-details	If PDNS should log DNS non-erroneous details
#
# log-dns-details=no

#################################
# log-dns-queries	If PDNS should log all incoming DNS queries
#
# log-dns-queries=no

#################################
# logging-facility	Log under a specific facility
#
# logging-facility=

#################################
# loglevel	Amount of logging. Higher is more. Do not set below 3
#
# loglevel=4

#################################
# lua-axfr-script	Script to be used to edit incoming AXFRs
#
# lua-axfr-script=

#################################
# lua-dnsupdate-policy-script	Lua script with DNS update policy handler
#
# lua-dnsupdate-policy-script=

#################################
# lua-prequery-script	Lua script with prequery handler (DO NOT USE)
#
# lua-prequery-script=

#################################
# master	Act as a master
#
# master=no

#################################
# max-cache-entries	Maximum number of entries in the query cache
#
# max-cache-entries=1000000

#################################
# max-ent-entries	Maximum number of empty non-terminals in a zone
#
# max-ent-entries=100000

#################################
# max-nsec3-iterations	Limit the number of NSEC3 hash iterations
#
# max-nsec3-iterations=500

#################################
# max-packet-cache-entries	Maximum number of entries in the packet cache
#
# max-packet-cache-entries=1000000

#################################
# max-queue-length	Maximum queuelength before considering situation lost
#
# max-queue-length=5000

#################################
# max-signature-cache-entries	Maximum number of signatures cache entries
#
# max-signature-cache-entries=

#################################
# max-tcp-connections	Maximum number of TCP connections
#
# max-tcp-connections=20

#################################
# max-tcp-connections-per-client	Maximum number of simultaneous TCP connections per client
#
# max-tcp-connections-per-client=0

#################################
# module-dir	Default directory for modules
#
# module-dir=/usr/lib64/pdns

#################################
# negquery-cache-ttl	Seconds to store negative query results in the QueryCache
#
# negquery-cache-ttl=60

#################################
# no-shuffle	Set this to prevent random shuffling of answers - for regression testing
#
# no-shuffle=off

#################################
# non-local-bind	Enable binding to non-local addresses by using FREEBIND / BINDANY socket options
#
# non-local-bind=no

#################################
# only-notify	Only send AXFR NOTIFY to these IP addresses or netmasks
#
# only-notify=0.0.0.0/0,::/0

#################################
# out-of-zone-additional-processing	Do out of zone additional processing
#
# out-of-zone-additional-processing=yes

#################################
# outgoing-axfr-expand-alias	Expand ALIAS records during outgoing AXFR
#
# outgoing-axfr-expand-alias=no

#################################
# overload-queue-length	Maximum queuelength moving to packetcache only
#
# overload-queue-length=0

#################################
# prevent-self-notification	Don't send notifications to what we think is ourself
#
# prevent-self-notification=yes

#################################
# query-cache-ttl	Seconds to store query results in the QueryCache
#
# query-cache-ttl=20

#################################
# query-local-address	Source IP address for sending queries
#
# query-local-address=0.0.0.0

#################################
# query-local-address6	Source IPv6 address for sending queries
#
# query-local-address6=::

#################################
# query-logging	Hint backends that queries should be logged
#
# query-logging=no

#################################
# queue-limit	Maximum number of milliseconds to queue a query
#
# queue-limit=1500

#################################
# receiver-threads	Default number of receiver threads to start
#
# receiver-threads=1

#################################
# resolver	Use this resolver for ALIAS and the internal stub resolver
#
# resolver=no

#################################
# retrieval-threads	Number of AXFR-retrieval threads for slave operation
#
# retrieval-threads=2

#################################
# reuseport	Enable higher performance on compliant kernels by using SO_REUSEPORT allowing each receiver thread to open its own socket
#
# reuseport=no

#################################
# security-poll-suffix	Domain name from which to query security update notifications
#
# security-poll-suffix=secpoll.powerdns.com.

#################################
# server-id	Returned when queried for 'server.id' TXT or NSID, defaults to hostname - disabled or custom
#
# server-id=

#################################
# setgid	If set, change group id to this gid for more security
#
setgid=pdns

#################################
# setuid	If set, change user id to this uid for more security
#
setuid=pdns

#################################
# signing-threads	Default number of signer threads to start
#
# signing-threads=3

#################################
# slave	Act as a slave
#
# slave=no

#################################
# slave-cycle-interval	Schedule slave freshness checks once every .. seconds
#
# slave-cycle-interval=60

#################################
# slave-renotify	If we should send out notifications for slaved updates
#
# slave-renotify=no

#################################
# soa-expire-default	Default SOA expire
#
# soa-expire-default=604800

#################################
# soa-minimum-ttl	Default SOA minimum ttl
#
# soa-minimum-ttl=3600

#################################
# soa-refresh-default	Default SOA refresh
#
# soa-refresh-default=10800

#################################
# soa-retry-default	Default SOA retry
#
# soa-retry-default=3600

#################################
# socket-dir	Where the controlsocket will live, /var/run when unset and not chrooted
#
# socket-dir=

#################################
# tcp-control-address	If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-address=

#################################
# tcp-control-port	If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-port=53000

#################################
# tcp-control-range	If set, remote control of PowerDNS is possible over these networks only
#
# tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10

#################################
# tcp-control-secret	If set, PowerDNS can be controlled over TCP after passing this secret
#
# tcp-control-secret=

#################################
# tcp-fast-open	Enable TCP Fast Open support on the listening sockets, using the supplied numerical value as the queue size
#
# tcp-fast-open=0

#################################
# traceback-handler	Enable the traceback handler (Linux only)
#
# traceback-handler=yes

#################################
# trusted-notification-proxy	IP address of incoming notification proxy
#
# trusted-notification-proxy=

#################################
# udp-truncation-threshold	Maximum UDP response size before we truncate
#
# udp-truncation-threshold=1680

#################################
# version-string	PowerDNS version in packets - full, anonymous, powerdns or custom
#
# version-string=full

#################################
# webserver	Start a webserver for monitoring (api=yes also enables the HTTP listener)
#
# webserver=no

#################################
# webserver-address	IP Address of webserver/API to listen on
#
# webserver-address=127.0.0.1

#################################
# webserver-allow-from	Webserver/API access is only allowed from these subnets
#
# webserver-allow-from=127.0.0.1,::1

#################################
# webserver-password	Password required for accessing the webserver
#
# webserver-password=

#################################
# webserver-port	Port of webserver/API to listen on
#
# webserver-port=8081

#################################
# webserver-print-arguments	If the webserver should print arguments
#
# webserver-print-arguments=no

#################################
# write-pid	Write a PID file
#
# write-pid=yes

#################################
# xfr-max-received-mbytes	Maximum number of megabytes received from an incoming XFR
#
# xfr-max-received-mbytes=100